TRX YBELL Center Post Rack Setup Guide

By TRX Suspension Training | Suspension | Published: 2026-10-24

Category: How-to Guides

Learn how to assemble and install your TRX YBELL Center Post Rack for safe, organized YBell storage. Follow these steps for a secure setup.

Quick answer

Assemble the heavy-duty steel frame, attach the bicycle hook storage arms, then mount the rack securely to a center post or wall for safe YBell storage.

Why proper installation matters

A correctly installed Center Post Rack keeps your YBells organized and prevents accidents. The rack's heavy-duty steel construction supports multiple YBells, but only if it's mounted securely. A loose rack can tip over or drop your equipment, damaging both the YBells and your floor.

Choosing the right location

The rack is designed to mount around a center post, but it also works on a sturdy wall. Ensure the mounting surface can support the combined weight of the rack and your YBells. Avoid drywall alone; use studs or solid concrete.

Step-by-step setup

Unpack and inspect all parts: Remove the rack and hardware from the box. Verify you have the main frame, bicycle hook arms, mounting brackets, screws, and any tools specified in the manual. Check for any damage during shipping. Missing or damaged parts? Contact support before proceeding.
Assemble the main frame: Connect the frame sections according to the included diagram. Use the provided bolts and tighten them by hand first, then use a wrench to secure them. Do not fully tighten until all sections are aligned. Over-tightening can strip threads; snug is enough.
Attach the bicycle hook storage arms: Slide each hook arm into the designated slots on the frame. Secure them with the locking pins or screws. Space the hooks evenly to accommodate different YBell sizes. Hooks should be level to prevent YBells from sliding off.
Mount the rack to the center post or wall: Position the rack against the post or wall at your desired height. Use a level to ensure it's straight. Mark the drill points, then drill pilot holes. Attach the rack using the supplied mounting brackets and screws. Tighten all bolts fully. Mounting on drywall alone is unsafe; always anchor into studs or concrete.
Test the rack before loading: Gently pull on the rack to ensure it's secure. Place one light YBell on a hook and check for stability. If the rack wobbles, tighten the mounting bolts or adjust the brackets. Once stable, load your YBells from smallest to largest. A stable rack should not move when you lift a YBell off a hook.

Product facts

TRX YBELL CENTER POST RACK: The Center Post Rack features heavy-duty steel construction and bicycle hook storage arms, holding any YBell Arc or Neo Series from 2.5 kg (5.5 lbs) up to 12 kg (26 lbs). This means you can store a full range of YBells in one place, keeping your workout area clutter-free and your equipment within easy reach.
TRX YBELL CENTER POST RACK